BOP Hose - Fabricante de mangueras flexibles

Duqiao economic development Zone, Jingxian, Hengshui, Hebei China
(86) 188-3188-7776
[email protected]

Steam Hose 210°C

Steam Hose 210°C

steel cord hose for saturated steam at a maximum working pressure 18 bar (261psi), used in the chemical industry, petrochemical and industrial applications in general. Not recommended for steam cleaner. The hose can be used for peaks of superheated steam at 230°C and at 18 bar. Attention: the use of superheated steam reduces the hose life. For longer life drain after use.

Tube: black, smooth, IIR rubber, resistant to saturated steam.

Reinforcement: inserts of steel wire.

Cover: red, pin pricked, smooth (wrapped finish), EPDM rubber with excellent resistance to high temperatures, weathering, abrasion, and ageing.

Temperature: from -40°C (-40°F) to +210°C (+410°F).

Inside Diameter		Outside Diameter		Working Pressure		Burst Pressure		Nominal Weight
Mm inch		Mm inch		Bar psi		Bar psi		kg/m lbs/ft
13	1/2	25	0,99	18	270	180	2700	0,51	0,34
19	3/4	31	1,22	18	270	180	2700	0,67	0,45
25	1	37	1,46	18	270	180	2700	0,90	0,61
51	2	65	2,56	18	270	180	2700	2,15	1,44
13	1/2	25	0,99	18	270	180	2700	0,51	0,34
19	3/4	31	1,22	18	270	180	2700	0,67	0,45
25	1	37	1,46	18	270	180	2700	0,90	0,61

Steam Hose 160°C

Steam Hose 160°C

softwall hot water discharge hose, for water that is even
slightly acidic, suitable also for non corrosive fluids in numerous applications in chemical industries.

Tube: black, smooth, EPDM rubber.

Reinforcement: high strength synthetic cord.

Cover: black, smooth, (wrapped finish) EPDM rubber, heat, weathering, and ozone resistant.

Temperature: from -40°C (-40°F) to +165°C (+329°F).

Inside Diameter		Outside Diameter		Working Pressure		Burst Pressure		Nominal Weight
Mm inch		Mm inch		Bar psi		Bar psi		kg/m lbs/ft
10	25/64	21	0,83	6	90	60	900	0,28	0,19
12	15/32	23	0,91	6	90	60	900	0,32	0,22
13	1/2	23	0,91	6	90	60	900	0,29	0,19
16	5/8	27	1,06	6	90	60	900	0,39	0,26
19	3/4	29	1,14	6	90	60	900	0,39	0,26
19	3/4	31	1,22	6	90	60	900	0,50	0,34
25	1	37	1,46	6	90	60	900	0,59	0,39
30	1-3/16	45	1,77	6	90	60	900	0,87	0,58
32	1-1/4	46,5	1,83	6	90	60	900	0,89	0,59
38	1-1/2	54	2,13	6	90	60	900	1,17	0,78
51	2	68	2,68	6	90	60	900	1,63	1,10

Hot Water Discharge Hose 120°C

Hot Water Discharge Hose 120°C

softwall hot water discharge hose, for water that is even
slightly acidic, suitable also for non corrosive fluids in numerous applications in chemical industries.

Tube: black, smooth, EPDM rubber.

Reinforcement: high strength synthetic cord.

Cover: black, smooth, (wrapped finish) EPDM rubber, heat, weathering, and ozone resistant.

Temperature: from -40°C (-40°F) to +120°C (+248°F).

Inside Diameter		Outside Diameter		Working Pressure		Burst Pressure		Nominal Weight
Mm inch		Mm inch		Bar psi		Bar psi		kg/m lbs/ft
10	25/64	20	0,79	10	150	30	450	0,31	0,21
12	15/32	22	0,87	10	150	30	450	0,35	0,23
13	1/2	20	0,79	10	150	30	450	0,22	0,15
15	19/32	25	0,99	10	150	30	450	0,41	0,27
16	5/8	26	1,02	10	150	30	450	0,43	0,29
18	23/32	28	1,10	10	150	30	450	0,47	0,32
19	3/4	27	1,06	10	150	30	450	0,33	0,22
20	35/32	30	1,18	10	150	30	450	0,51	0,34
25	1	35	1,38	10	150	30	450	0,61	0,41
30	1-3/16	41,5	1,64	10	150	30	450	0,82	0,55
32	1-1/4	43,5	1,71	10	150	30	450	0,86	0,58
38	1-1/2	50	1,97	10	150	30	450	1,06	0,71
45	1-49/64	61	2,40	10	150	30	450	1,66	1,12
51	2	65,5	2,58	10	150	30	450	1,66	1,11
63,5	2-1/2	78,5	3,09	10	150	30	450	1,94	1,31

Hydraulic Hose SAE 100R13

SAE 100R13

Heavy duty, high impulse, multiple spiral steel wire reinforced, rubber covered hydraulic hose

Tube: oil resistant synthetic rubber;

Reinforcement: four or six spiral plies of steel wire wrapped in alternating directions;

Cover: oil and weather resistant synthetic rubber.

Temperature:-40℃.to +121℃

Hose ID		Wire OD	Hose OD	Working Pressure		Burst Pressure		Minimum bend radius	Weight
inch	mm	mm	mm	Mpa	Psi	Mpa	Psi	mm	Kg/m
3/4	19.0	28.4	32.1	34.5	5000	138	20000	240	1.7
1	25.4	34.8	38.7	34.5	5000	138	20000	300	2.25
1-1/4	31.8	47.5	50.2	34.5	5000	138	20000	420	3.9
1-1/2	38.1	52.5	57.7	34.5	5000	138	20000	500	5.1
2	50.8	68	71.5	34.5	5000	138	20000	630	7.9

Hydraulic Hose SAE 100R12

Hydraulic Hose SAE 100R12

Heavy duty, high impulse, four spiral steel wire reinforced, rubber covered hydraulic hose

Tube: oil resistant synthetic rubber;

Reinforcement: four spiral plies of steel wire wrapped in alternating directions;

Cover: oil and weather resistant synthetic rubber.

Temperature:-40℃.to +121℃

Hose ID		Wire OD	Hose OD	Working Pressure		Burst Pressure		Minimum bend radius	Weight
inch	mm	mm	mm	Mpa	Psi	Mpa	Psi	mm	Kg/m
3/8	9.5	17.2	20.3	27.5	4000	110	16000	125	0.65
1/2	12.7	20.7	23.8	27.5	4000	110	16000	180	0.85
5/8	15.9	24.6	27.4	27.5	4000	110	16000	200	1.3
3/4	19.0	27.7	30.7	27.5	4000	110	16000	240	1.5
1	25.4	34.9	38	27.5	4000	110	16000	300	2.0
1-1/4	31.8	43.9	47	20.7	3000	82.8	12000	420	2.9
1-1/2	38.1	50.4	53.5	17.2	2500	68.8	10000	500	3.3
2	50.8	63.7	66.7	17.2	2500	68.8	10000	630	4.9

Hydraulic Hose SAE 100R9

Hydraulic Hose SAE 100R9

Heavy duty, high impulse, four spiral steel wire reinforced, rubber covered hydraulic hose

Tube: oil resistant synthetic rubber;

Reinforcement: four spiral plies of steel wire wrapped in alternating directions;

Cover: oil and weather resistant synthetic rubber.

Temperature:-40℃.to +121℃

Hose ID		Wire OD	Hose OD	Working Pressure		Burst Pressure		Minimum bend radius	Weight
inch	mm	mm	mm	Mpa	Psi	Mpa	Psi	mm	Kg/m
3/8	9.5	17.5	21	44.5	6450	180	26000	180	0.8
1/2	12.7	20.2	24	41.5	6000	166	24000	230	0.9
5/8	15.9	23.8	28.2	35	5000	140	20000	250	1.2
3/4	19.0	28.2	32.2	35	5000	140	20000	300	1.6
1	25.4	35.5	39.7	28	4000	112	16000	340	2.1
1-1/4	31.8	46	50.8	21	3000	84	12000	460	3.3
1-1/2	38.1	52.4	57.7	18.5	2700	74	10800	560	3.7
2	50.8	65.3	69.6	16.5	2400	66	9600	660	5.5

Hydraulic Hose SAE 100 R7 / DIN EN 855

Hydraulic Hose SAE 100 R7 / DIN EN 855

Medium Pressure hydraulic lines 70 to 210 bar

Tube: Thermoplastic elastomer

Reinforcement: 1 braid of synthetic fiber

Cover: Black colour, pin pricked polyurethane

Temperature Range: -40℃.to +100℃

DN	ID		OD	Working Pressure		Burst Pressure		Minimum Bend Radius
DN	inch	mm	mm	Mpa	psi	Mpa	psi	mm
5	3/16	4.8	11.1	21	3000	84	12000	50
6	1/4	6.4	12.7	21	3000	84	12000	65
8	5/16	7.9	14.3	19	2750	76	11000	75
10	3/8	9.5	15.9	17.5	2500	70	10000	75
13	1/2	12.7	19.8	15.5	2250	62	9000	100
16	5/8	15.9	23.0	14	1500	56	8200	125
19	3/4	19.0	26.6	10.5	1300	42	6000	150
25	1	25	26.4	9	1000	36	5200	200
32	1 5/16	32	33.3	7	1000	28	4000	300

Hydraulic Hose SAE 100R6

Hydraulic Hose SAE 100R6

Fiber Reinforced (nonmetallic), Rubber Covered Hydraulic Hose

Tube: Oil resistant synthetic rubber

Reinforcement: One layer of suitable fiber

Cover: Oil and weather resistant synthetic rubber

Temperature Range: -40℃.to +100℃

DN	ID		OD	Working Pressure		Burst Pressure		Minimum Bend Radius	Weight
DN	inch	mm	mm	Mpa	psi	Mpa	psi	mm	kg/m
5	3/16	4.8	11.1	3.4	500	13.8	2000	50	0.11
6	1/4	6.4	12.7	2.8	400	11.0	1600	65	0.15
8	5/16	7.9	14.3	2.8	400	11.0	1600	75	0.16
10	3/8	9.5	15.9	2.8	400	11.0	1600	75	0.18
13	1/2	12.7	19.8	2.8	400	11.0	1600	100	0.26
16	5/8	15.9	23.0	2.4	350	9.7	1400	125	0.29
19	3/4	19.0	26.6	2.1	300	8.3	1200	150	0.4

Hydraulic Hose SAE 100R5

Hydraulic Hose SAE 100R5

Recommended for: Medium pressure hydraulic oil lines, other air, water and oil service

Tube: Black, oil and heat resistant synthetic rubber.

Reinforcement: Textile inner braid and a braid of higher tensile steel wire

Cover: Black, oil, abrasion and weather resistant synthetic rubber (wrapped impression).

Temperature Range: -40 ℃ to +100℃

I.D.		O.D.		MAX WP		BEND RADIUS
in.	mm.	in.	mm.	psi	Mpa	in.	mm.
3/16	5	0.51	13	3000	21	3	75
1/4	6.4	0.58	14.7	3000	21	3.4	85
5/16	8	0.67	17	2250	15.5	4	100
13/32	10.5	0.76	19.2	2000	14	4.6	115
1/2	12.9	0.91	23.1	1750	12	5.6	140
5/8	16	1.06	27	1500	10.5	6.6	165
7/8	22.2	1.22	31	800	5.5	7.4	185
1 1/8	28.6	1.49	37.8	650	4.5	9.2	230
1 3/8	35	1.74	44.2	500	3.5	10.6	265
1 13/16	46.2	2.2	55.9	363	2.5	13.4	335
2 3/8	60.3	2.87	73	348	2.4	24.4	610

Hydraulic Hose SAE 100R4

Hydraulic Hose SAE 100R4

Wire inserted hydraulic suction hose

Tube: Black, oil and heat resistant synthetic rubber.

Reinforcement: Spiral plied synthetic fabric with wire helix.

Cover: Black, oil, abrasion and weather resistant synthetic rubber (wrapped impression).

Temperature Range: -40 ℃ to +100℃

I.D.		O.D.		MAX WP		BEND RADIUS		WEIGHT
in.	mm.	in.	mm.	psi	Mpa	in.	mm.	lb./ft.	kg./m
3/4	19.05	1.37	34.9	300	2	5	127	0.39	0.58
1	25.4	1.62	41.3	250	1.7	6	152	0.65	0.97
1 1/4	31.75	2	50.8	200	1.4	8	203	0.98	1.46
1 1/2	38.1	2.25	57.2	150	1	10	254	1.11	1.66
2	50.8	2.75	69.9	100	0.7	12	305	1.08	1.61
2 1/2	63.5	3.25	82.6	100	0.7	14	356	1.88	2.8
3	76.2	3.75	95.3	100	0.7	18	457	2.2	3.37
3 1/2	90	4.06	103	45	0.3	21	530	2.68	3.99
4	102	4.53	115	38	0.25	24	610	3.2	4.7

More...

Hydraulic Hose SAE 100R3/EN854

Hydraulic Hose SAE 100R3/EN854

Double Fiber Braid (nonmetallic ),Rubber Covered Hydraulic Hose

Tube: Oil Resistant synthetic rubber

Reinforcement: Two high tensile fiber braid (2T/B)

Cover: Abrasion and weather resistant synthetic rubber

Temperature Range: -40°Cto +100°C

DN	ID		OD	Working Pressure		Burst Pressure		Minimum Bend Radius	Weight
DN	inch	mm	mm	Mpa	PSI	Mpa	PSI	mm	kg/m
5	3/16	4.8	13.4	41.4	6000	165	23720	89	0.32
6	1/4	6.4	15.0	40.0	5800	160	22840	102	0.36
8	5/16	7.9	16.6	36.0	5250	140	20000	114	0.45
10	3/8	9.5	19.0	33.1	4800	132	18840	127	0.54
13	1/2	12.7	22.2	27.6	4000	110	15720	178	0.68
16	5/8	15.9	25.4	25.0	3630	100	14280	203	0.8
19	3/4	19.0	29.3	21.5	3120	85	12280	241	0.94
25	1	25.4	38.0	16.5	2400	65	9420	305	1.35
32	1 1/4	31.8	48.3	12.5	1820	50	7140	419	2.15
38	1 1/2	38.1	54.6	9.0	1310	36	5140	508	2.65
51	2	50.8	67.3	8.0	1160	32	4560	635	3.42

Hydraulic Hose SAE 100R2AT/DIN EN 853 2SN

Hydraulic Hose SAE 100R2AT/DIN EN 853 2SN

High pressure, steel wire reinforced, rubber covered hydraulic hose type AT

Tube: Oil resistant synthetic rubber

Reinforcement: two high tensile steel wire layers

Cover: Abrasion and weather resistant synthetic rubber

Temperature Range: -40℃ to +100 ℃

DN	ID		OD	Working Pressure		Burst Pressure		Minimum Bend Radius	Weight
DN	inch	mm	mm	Mpa	psi	Mpa	psi	mm	kg/m
5	3/16	4.8	13.4	41.4	6000	165	23720	89	0.32
6	1/4	6.4	15.0	40.0	5800	160	22840	102	0.36
8	5/16	7.9	16.6	36.0	5250	140	20000	114	0.45
10	3/8	9.5	19.0	33.1	4800	132	18840	127	0.54
13	1/2	12.7	22.2	27.6	4000	110	15720	178	0.68
16	5/8	15.9	25.4	25.0	3630	100	14280	203	0.8
19	3/4	19.0	29.3	21.5	3120	85	12280	241	0.94
25	1	25.4	38.0	16.5	2400	65	9420	305	1.35
32	1 1/4	31.8	48.3	12.5	1820	50	7140	419	2.15
38	1 1/2	38.1	54.6	9.0	1310	36	5140	508	2.65
51	2	50.8	67.3	8.0	1160	32	4560	635	3.42

Hydraulic Hose SAE 100R1AT /DIN EN 853 1SN

Hydraulic Hose SAE 100R1AT /DIN EN 853 1SN

Steel wire reinforced, rubber covered hydraulic hose type AT

Tube: Oil resistant synthetic rubber

Reinforcement:one high tensile steel wire braid

Cover: Abrasion and weather resistant synthetic rubber

Temperature Range: -40℃ to +100℃

DN	ID		OD	Working Pressure		Burst Pressure		Minimum Bend Radius	Weight
DN	inch	mm	mm	Mpa	psi	Mpa	psi	mm	kg/m
6	1/4	6.4	15.9	22.5	3270	90.0	12840	100	0.31
8	5/16	7.9	17.5	21.5	3120	85.0	12280	114	0.38
10	3/8	9.5	19.8	18.0	2615	72.0	10280	127	0.45
13	1/2	12.7	23.0	16.0	2320	64.0	9180	178	0.55
16	5/8	15.9	26.2	13.0	1890	52.0	7420	200	0.63
19	3/4	19.0	30.2	10.5	1530	42.0	6000	240	0.77
25	1	25.4	38.1	8.8	1280	35.0	5020	300	1.06
32	1 1/4	31.8	46.0	6.3	920	25.0	3600	419	1.45
38	1 1/2	38.1	52.4	5.0	730	20.0	2860	500	1.80
51	2	50.8	66.7	4.0	580	16.0	2280	630	2.30

Smoothbore Water Hose 10bar

Smoothbore Water Hose 10bar

designed to convey water, non aggressive fluids and compressed air in various industrial and agricultural applications.

Tube: black, seamless synthetic rubber compound.

Reinforcement: high strength synthetic cord.

Cover: black, seamless synthetic rubber compound, ageing and weathering resistant

Temperature: from -30°C (-22°F) to +70°C (+158°F).

Inside Diameter		Outside Diameter		Working Pressure		Burst Pressure		Nominal Weight
Mm inch		Mm inch		Bar psi		Bar psi		kg/m lbs/ft
5	12/61	10,5	0,41	10	150	30	450	0,09	0,06
8	5/16	15	0,59	10	150	30	450	0,16	0,11
10	25/64	15	0,59	10	150	30	450	0,12	0,08
10	25/64	17	0,67	10	150	30	450	0,18	0,12
12	15/32	17	0,67	10	150	30	450	0,14	0,09
13	1/2	19	0,75	10	150	30	450	0,19	0,13
15	19/32	21	0,83	10	150	30	450	0,21	0,14
16	5/8	23	0,91	10	150	30	450	0,27	0,18
19	3/4	26	1,02	10	150	30	450	0,31	0,21
20	25/32	30	1,18	10	150	30	450	0,50	0,34
22	7/8	30	1,18	10	150	30	450	0,41	0,28
25	1	33	1,30	10	150	30	450	0,46	0,31
25	1	35	1,38	10	150	30	450	0,60	0,40

Página 12 de 13

"Conduct our relationships with responsibility, honesty and loyalty. Cherish an excellent work environment with respect and cooperation at all levels. Offer products and services with quality, technology and competitiveness. "

Find us at

MAIN OFFICE:
Duqiao, Jingxian, Hengshui, Hebei Province, China

0086-188-3188-7776
[email protected]

0086 -188 3188 7776
[email protected]

Monday - Saturday: 8:00 Am - 18:00 Pm
Sunday: Closed

More...

Find us at

Send us a message