BOP Hose

Duqiao economic development Zone, Jingxian, Hengshui, Hebei China
(86) 188-3188-7776
[email protected]

Choke and Kill Hose

Tube: Fluoroelastomer , resists abrasion, corrosion, oil, weather and up to 20% H2S

Reinforcement: Multiple layers of polyester cord over tube, high tensile steel cables.

Cover: NBR, Specially compounded, resistant to abrasion, corrosion, cutting, gouging, oil and weather.

Application: Flexible Connection between standpipe and swivel(Rotary Drilling) or between pump and standpipe(Rotary Vibrator) for pumping mud at extra high pressure in oil drilling and exploration work.

Fitting: Hammer Unions, API Male End, Flanges

Attachment: Safety Clamp & Chain

Applicable Standard: API Spec 16C; SY/T5323-2004

ID, mm(inch)	WP,MPA(PSI)	BP,MPA(PSI)	Min. Bending Radius(mm)
50.8(2)	35.0(5000)	105.0(15000)	900
64(2 1/2)			1000
76(3)			1000
89(3 1/2)			1100
101.6(4)			1200
50.8(2)	52.0(7200)	70.0(10000)	1950
63.5(2 1/2)			1000
76.2(3)			1050
89(3 1/2)			1150
101.6(4)			1250
50.8(2)	70.0(10000)	157.5(22500)	1000
63.5(2 1/2)			1100
76.2(3)			1150
89(3 1/2)			1200
101.6(4)			1250
50.8(2)	105.0(15000)	236.25(33750)	1000
63.5(2 1/2)			1150
76.2(3)			1200
50.8(2)	138.0(20000)	310.0(45000)	900
64(2 1/2)			1100
76.2(3)			1200

Rotary Drilling/Vibrator Hose

Tube: NBR, specially compounded for handling abrasive, corrosive and oily drilling mud

Reinforcement: Multiple layers of polyester cord over tube, high tensile steel cables.

Cover: NBR, Specially compounded, resistant to abrasion, corrosion, cutting, gouging, oil and weather.

Fitting: Hammer Unions, API Male End, Flanges

Attachment: Safety Clamp & Chain

Applicable Standard: API Spec 7k/ISO14693

ID	2"							2 1/2"							3"
Class	A	B	C	D	E	F	G	A	B	C	D	E	F	G	A	B	C	D	E	F	G
Working Pressure(PSI)	1500	2000	4000	5000	7500	10000	15000	1500	2000	4000	5000	7500	10000	15000	1500	2000	4000	5000	7500	10000	15000
Test Pressure(PSI)	3000	4000	8000	10000	15000	15000	22500	3000	4000	8000	10000	15000	15000	22500	3000	4000	8000	10000	15000	15000	22500
Min. Bending Radius(mm)	800	800	850	850	900	950	1000	900	900	1000	1000	1050	1100	1150	950	950	1050	1050	1100	1150	1150

ID	3 1/2"							4"						5"
Class	A	B	C	D	E	F	G	A	B	C	D	E	F	A	B	C	D
Working Pressure(PSI)	1500	2000	4000	5000	7500	10000	15000	1500	2000	4000	5000	7500	10000	1500	2000	4000	5000
Test Pressure(PSI)	3000	4000	8000	10000	15000	15000	22500	3000	4000	8000	10000	15000	15000	3000	4000	8000	10000

Min. Bending Radius(mm)

1000

1100

1150

1200

1050

1100

1150

1200

1300

Rotary Decoking Hose

Tube: NBR, specially compounded for handling abrasive, corrosive and oily drilling mud

Reinforcement: Multiple layers of polyester cord over tube, high tensile steel cables.

Cover: NBR, Specially compounded, resistant to abrasion, corrosion, cutting, gouging, oil and weather.

Fitting: Hammer Unions, API Male End, Flanges

Attachment: Safety Clamp & Chain

ID	3"							3 1/2"							4"
Class	A	B	C	D	E	F	G	A	B	C	D	E	F	G	A	B	C	D	E	F
Working Pressure(PSI)	1500	2000	4000	5000	7500	10000	15000	1500	2000	4000	5000	7500	10000	15000	1500	2000	4000	5000	7500	10000
Test Pressure(PSI)	3000	4000	8000	10000	15000	15000	22500	3000	4000	8000	10000	15000	15000	22500	3000	4000	8000	10000	15000	15000
Min. Bending Radius(mm)	950	950	1050	1050	1100	1150	1150	1000	1000	1100	1150	1150	1200	1050	1050	1050	1100	1100	1150	1200

Application: the hose for well control—GNG high-pressure, fire-resistant and heat-insulation hose assembly is mainly used for the hydraulic control of the BOP for drilling and for hydraulic transmission at high temperature and flammable places in the metallurgic industry.

Classification: high molecular polymer jacket type; stainless steel armored jacket type and braided stainless steel wire jacket type

Standard: API Spec 16D; SY/T5053.2-2002

I.D(mm)	O.D(mm)	W.P(MPA)	B.P(MPA)	Min. Bending Radius(MM)	Thread	Working Time with Fire-Resistance at 750C
						Normal	Limit
6.3	24	35	105	130	NPT,LP	5	25
	26	70	175
8	28	35	105	140
	32	70	175
10	30	35	105	160
	34	70	175
12.5	37	35	105	210
	43	70	175
16	41	35	105	260
	47	70	175
19	44	35	105	280
	50	70	175
22	47	35	105	320
	53	70	175
25	50	35	105	360
	56	70	175
31.50	56	35	105	460
	62	70	175
38	63	35	105	560

Stripwound Metal Hose

Stripwound Metal Hose

Description

Hose made by helically winding a pre-formed metal strip into a fully interlocked profile. The hose gets its flexibility and suppleness from the sliding of metal components within the interlock section.

Principal Applications

The ideal hose for conveyance of truck exhaust gas and all applications requiring a very strong and flexible hose. Very efficient mechanical protection (armouring against impact, crushing, hot metal splash) of rubber hoses, electrical cables and heat insulation of technical hoses.In the smaller diameters, excellent mechanical protection of electric wires and cables, telephone hand set cables, security roller doors, thermocouplers, instrument wires and parachute rip cord housings. Also ideal as a lining for other hoses in abrasive media applications.

Standards

Manufactured to the specifications where applicable of ISO 15465 Type DOU.

Pressure Capability

Whilst this hose cannot be expected to retain gas or materials under pressure, it can generally be used for pressures up to1 bar (100 kpa) where the discharge end of the hose is open ended.

Materials of Construction and Temperature

Galvanized Steel - up to 350˚C

Stainless Steel AISI 304 - up to 750˚C

Supply Lengths - standard

5-152mm- 9, 15 metes

178-355mm- 5 metes

Specifications Nominal bore	Nominal bore	Outside Dimensions	Static Bend Raduis	Dynamic Bend Radius	Weight
(mm)	(inches)	(mm)	(mm)	(mm)	(kg/M)
5	3/16”	7.2	27	1.1	0.09
6	1/4”	8.3	32	1.3	0.11
8	5/16”	10.3	35	1.4	0.14
10	3/8”	12.5	37	1.5	0.17
12	1/2”	15.0	62	2.4	0.23
19	3/4”	22.0	140	5.5	0.65
25	1”	28.0	152	6.0	0.75
32	1 1/4”	36.0	160	6.3	0.85
38	1 1/2”	41.3	166	6.6	1.14
41	1 5/8”	44.3	180	7.1	1.20
44	1 3/4”	47.3	190	7.5	1.30
48	1 7/8”	51.3	195	7.8	1.40
51	2”	54.3	205	8.1	1.50
57	2 1/4”	60.3	235	9.2	1.70
63	2 1/2”	66.3	260	10.2	1.90
69	2 3/4”	73.3	285	11.2	2.10
76	3”	79.3	305	12.0	2.30
90	3 1/2”	94.2	350	13.7	3.24
102	4”	106.2	370	14.6	3.50
114	4 1/2”	118.2	490	19.3	4.00
127	5”	131.2	515	20.2	4.50
140	5 1/2”	114.2	600	23.6	4.90
152	6”	156.2	655	25.7	5.20
178	7”	183.0	740	29.2	7.50
203	8”	208.0	800	31.5	8.50
230	9”	234.0	950	38.0	9.50
254	10”	259.0	1100	43.7	10.60
305	12”	310.0	1400	55.1	13.00
355	14”	360.0	1600	63.0	15.00

Smooth Bore Stripwound Metal Hose

Smooth Bore Stripwound Metal Hose

Description

Smooth Bore Stripwound Hose is made by helically winding two pre-formed strips of metal into a double interlock hose. Through a unique manufacturing process the inner liner becomes an integral part of the hose. It covers the interlock joints to form a relatively smooth inner bore.

Materials of Construction and Temperature

Stainless Steel AISI 304 - up to 750˚C

Supply Lengths

Maximum manufacturing lengths:

up to 102mm9 Metes

114 to 152mm 6 Metes

over 152mm3 Metes

Standards

Manufactured to the specifications where applicble of ISO 15465 Type DOU.

Nominal Bore Inside	Inside Nominal Bore	Outside	Bend Radius	Bend Radius	Weight / Metre
(inches)	(mm)	(mm)	(inches)	(mm)	(kg)
3”	76	81	16	406	3.90
3 3/4”	95	100	17.7	450	4.50
4”	102	107	18.0	457	4.60
5”	127	132	22.0	559	6.15
6”	152	158	25.0	635	7.70
8”	200	210	36.0	900	11.00

HPI Pressure Tight Stripwound Metal Hose

HPI Pressure Tight Stripwound Metal Hose

Description

Pressure-tight technical hose made by helically winding a pre-formed metal strip into a fully interlocked hose and inserting into the lock section a high temperature composite packing for fluid tightness.

Principal Applications

Conveyance of corrosive fluids, bitumen, oxygen, steam, abrasive and pulverised products. HPI is a strong robust hose.

Standards

Manufactured to the specifications where applicable of ISO 15465 Type DOP.

Pressure Capability

The nominal working pressure stated has a safety factor to burst pressure of 3:1. The burst pressure is measured with the hose being straight and motionless under internal hydrostatic pressure at ambient temperature.

Materials of Construction and Temperature

Galvanized steel

Stainless Steel AISI 304

Composite packing - up to +200°C - service life of the hose reduces significantly at elevated temperatures above 200°C

Fitting Attachment

We strongly recommend the use only of packed on reattachable fittings if hose is to be used for liquid use. Welding of this hose is not recommended as the welding process could damage the packing in the hose creating a leak path.

Supply Lengths - standard

19-150mm9, 15 metes

175-200mm9 metes

Longer lengths available on special order.

Inside Nominal bore	Inside Nominal bore	Outside Nominal bore	Nominal Pressure	Nominal Pressure	Bend Radius	Bend Radius	Weight Metre
(mm)	(inches)	(mm)	(Galv)	(SS304)	(Static)	(Dynamic)	(kg)
19	3/4”	24	31	32	150	180	0.87
25	1”	30	27	32	205	215	1.07
32	1 1/4”	37	22	32	230	255	1.25
38	1 1/2”	45	20	31	280	355	2.05
50	2”	57	17	26	340	430	2.65
63	2 1/2”	71	16	20	430	485	4.24
75	3”	83	14	17	485	565	4.86
100	4”	110	11	14	575	750	7.75
127	5”	137	10	12	660	940	9.58
150	6”	162	9	10	825	1075	14.00
175	7”	187	5	9	1000	1200	16.00
200	8”	215	4	8	1200	1400	20.00

High Pressure PTFE Hose

HIGH PRESSURE & ULTRA HIGH PRESSURE PTFE HOSE

Our ultra-high pressure hose series is constructed with a carbon black anti-static (conductive) PTFE post-sintered inner core and stainless steel wire braid reinforcement. The MHP and UHP series hose is the premiere product for rapid rate impulse applications.

This product is ideal for use in the gas industries and heavy duty applications.

We offer high pressure PTFE hose in both post-sintered (for gaseous and heavy duty applications) and nonpost-siintered (for most industrial applications) options.

Temperature rating: -65°F to 450°F

Nominal Size	I.D	O.D	Min. Bend Radius	Operating Pressure
(in)	(in)	(in)	(in)	(psi)
1/4	0.222	0.390	1.5	5,000
3/8	0.308	0.490	2.5	5,000
1/2	0.401	0.615	2.9	5,000
5/8	0.495	0.730	3.3	5,000
3/4	0.617	1.990	3.9	5,000
1	0.867	1.270	5.0	5,000
1 1/4	1.118	1.660	12.0	5,000
1 1/2	1.375	1.900	14.0	4,000
1/4	0.222	0.390	1.5	5,000

Convoluted PTFE Hose

CONVOLUTED PTFE HOSE

Self draining helical PTFE stainless steel wire reinforced hose ideal for demanding high purity and chemical applications.

Standard fitting material is stainless steel, steel and Halar encapsulated.

Nominal Size	I.D	O.D	Min. Bend Radius	Operating Pressure	Min. Burst Pressure	Max. Length
(in)	(in)	(in)	(in)	(psi)	(psi)	(ft)
1/2	0.512	0.785	1	1,000	4,000	75
3/4	0.750	1.090	2	1,000	4,000	50
1	0.998	1.300	3	1,000	4,000	50
1 1/4	0.239	1.560	6.25	1,500	4,000	50
1 1/2	0.500	1.792	7.5	750	3,000	50
2	0.982	2.333	10	500	2,500	50

Smooth Bore Teflon Hose

SMOOTHE BORE MED. PRESSURE PTFE HOSE

A smooth bore PTFE stainless steel wire reinforced hose designed

for high purity applications and chemical extremes. An excellent

choice for pharmaceutical, food and beverage applications.

Standard fitting material is stainless steel or brass.

Nominal Size	I.D	O.D	Min. Bend Radius	Operating Pressure	Min. Burst Pressure
(in)	(in)	(in)	(in)	(psi)	(psi)
3/16	0.125	0.234	2	3,000	15,000
1/4	0.187	0.312	2	3,000	14,000
5/16	0.0250	0.375	3	3,000	13,000
3/8	0.312	0.445	4	2,500	12,000
1/2	0.406	0.649	5.2	2,000	9,000
5/8	0.500	0.648	6.5	1,500	8,500
3/4	0.625	0.778	7.7	1,200	6,000
1	0.875	1.030	9	1,000	4,000
1 1/4	1.125	1.315	16	800	3,200

More...

High Pressure Flexible Metal Hose

HPC High Pressure

Annular Corrugated Metal Hose

Principal Applications

HPC is ideal for the conveyance of all fluids at elevated pressures within a wide range of temperatures.

HPC being inherently leak proof is suitable for high pressure and heavy duty applications, in many instances replacing high pressure rubber hydraulic hose in high temperature environments.

Standards: Manufactured to the specifications where applicable of ISO 10380.

Supply Lengths: Random lengths of 10-30 metres depending upon diameter.

Product Cod:

HPC_ _ _

Materials of Construction

Hose: AISI 304, AISI 316/L

Braid: AISI 304 (standard), AISI 316

Specifications Nominal bore	Nominal bore	Outside Dimensions	Nominal Pressure	Burst Pressure	Static Bend Radius	Dynamic Bend Raduis	Weight
(mm)	(mm)	(mm)	(bars)	(bars)	(mm)	(mm)	(kg/M)
6	1/4”	13.0	255	1020	25	110	0.80
10	3/8”	19.4	195	780	38	150	1.00
12	1/2”	21.8	185	740	45	165	1.20
20	3/4”	34.5	145	580	60	210	1.60
25	1”	43.0	125	500	80	230	2.50
32	1 1/4”	53.5	122	488	90	270	3.60
40	1 1/2”	62.0	120	480	110	310	4.40
50	2”	70.0	100	400	130	400	4.70
63	2 1/2”	89.0	65	260	210	500	6.00
75	3”	103.0	60	240	230	600	7.50
100	4”	129.0	38	152	500	1000	9.00
125	5”	157.0	32	128	560	1100	11.00
150	6”	182.0	30	120	610	1200	16.00

Annular Corrugated Metal Hose

Annular Corrugated Metal Hose

Description

A corrugated flexible metallic hose with standard pitch annular corrugations, hydroformed from butt welded precision tube.

The depth and shape of the corrugations provides good flexibility and cycle life.

One or two layers of close weave metallic wire braid applied at the optimum angle is added to the outside of the hose to enhance the pressure capability of the hose. The hydroforming with water as the forming medium enables the corrugation to be formed from thicker material and and allows for the preferable deeper corrugations. This method of forming is also less stressful on the material assisting in a longer service life.

Principal Applications

Annular is ideal for the conveyance of liquids and gases in a wide range of temperatures from cyrogenic -200°C to over +500°C, however note as the temperature rises the pressure capability rating of the hose reduces.

The hose can be used for simple conveying of product, in-plant applications to correct pipework mis-alignment or with moving machinery and equipment. The hose being manufactured usually from stainless steel is suitable for a wide range of chemicals in corrosive situations.

In addition, the U-shape of the corrugations gives the hose a self draining feature, of particular interest in the food, plastics and bitumen industries requiring regular hose cleaning.

Materials of Construction

Hose: AISI 304, AISI 316/L

Braid: AISI 304 (standard), AISI 316

Other materials available on order.

Supply Lengths

Standard mill 5 metre lengths

Longer lengths available on order

Standards

Manufactured to the specifications where applicable of ISO 10380 Type 1-10 – Corrugated Metal Hose of High Flexibility with medium fatigue life.

Nominal bore		No. Braid Layers	O.D	W.P	B.P	Static Bend Raduis	Dynamic Bend Radius	Weight
(mm)	(inches)		(mm)	(bars)	(bars)	(mm)	(mm)	(kg/M)
12	1/2	0	18.6	11	-	24	165	0.12
		1	20.2	80	320	45		0.32
		2	21.8	130	520	-		0.53
20	3/4	0	29.0	5	-	35	225	0.27
		1	30.6	65	260	70		0.57
		2	32.2	100	400	-		0.88
25	1	0	35.5	4	-	42	260	0.36
		1	37.3	50	200	85		0.75
		2	39.2	80	320	-		1.15
32	1 1/4	0	44.0	4	-	51	300	0.46
		1	46.5	40	160	105		1.07
		2	49.0	75	300	-		1.70
40	1 1/2	0	52.0	3	-	61	340	0.65
		1	54.5	38	152	130		1.47
		2	57.0	65	260	-		2.30
50	2	0	65.0	2	-	73	390	0.80
		1	67.5	32	128	160		2.00
		2	70.0	50	200	-		3.30
65	2 1/2	0	81.0	1.5	-	90	450	1.20
		1	83.5	23	90	180		2.70
		2	85.5	38	152	-		4.20
80	3	0	100.0	1.3	-	108	520	1.85
		1	103.0	20	80	240		3.60
		2	106.0	33	135	-		5.40
100	4	0	127.0	0.7	-	126	660	2.50
		1	130.0	15	60	290		5.10
		2	133.0	25	100	-		7.80
125	5	0	152.0	0.5	-	150	850	3.60
		1	155.0	14	56	340		6.80
		2	158.0	22	88	-		10.00
150	6	0	174.0	0.4	-	-	950	4.70
		1	177.0	11	44	170		8.40
		2	180.0	17	68	400		12.10
200	8	0	230.0	0.3	-	500	1100	6.30
		1	234.0	9	36			11.30
		2	238.0	13	52			16.50
250	10	0	285.0	0.2	-	700	1300	11.30
		1	290.0	7	24			17.40
		2	295.0	9	36			23.80
300	12	0	337.0	0.2	-	900	1500	13.20
		1	342.0	5	20			20.20
		2	347.0	7	20			28.00

Flexible Pump Connector

Flexible Pump Connector

Specifications

Stainless Steel Hose

Single Stainless Braid

Male NPT Schedule 40 Carbon Steel Fittings

Options

Bronze Hose & Braid

Stainless Steel Fittings

Schedule 80 Fittings

Hex Nut Fittings

Double Braided For Higher Pressure

I.D (in.)	Overall Length	Max. W.P. At Room Temp. (psi)	Approx. Wt. (lbs.) Per Unit
1/2	6-1/2"	950	1/2
3/4	7"	700	1
1	8"	550	1
1-1/4	8-1/2"	420	1-1/2
1-1/2	9"	380	2
2	10-1/2"	300	2-1/2
2-1/2	12"	300	2-1/2
3	14"	250	4
4	16"	200	4-1/2

pipe_connector_1 BOP Hose - Fabricante de mangueras flexibles | Hengshui Ruiming

pipe_connector_2 BOP Hose - Fabricante de mangueras flexibles | Hengshui Ruiming

Fuel and Oil Hose

Página 3 de 13

"Conduct our relationships with responsibility, honesty and loyalty. Cherish an excellent work environment with respect and cooperation at all levels. Offer products and services with quality, technology and competitiveness. "

Find us at

MAIN OFFICE:
Duqiao, Jingxian, Hengshui, Hebei Province, China

0086-188-3188-7776
[email protected]

0086 -188 3188 7776
[email protected]

Monday - Saturday: 8:00 Am - 18:00 Pm
Sunday: Closed

More...

Find us at

Send us a message